Find the Right Frigidaire Parts by Model Number

Man crouching beside an open refrigerator, using a flashlight to look for the model number tag

To order the right Frigidaire part, use the full model number from the tag on the appliance itself, not the shorter number printed in the manual. That one habit prevents most wrong-part returns, whether you’re buying a refrigerator water filter, a range igniter or a dryer door switch. Frigidaire’s owner support pages say the location of the model and serial number tag varies by appliance, so a few minutes of looking saves you a return shipment. Frigidaire parts come in two broad groups: genuine OEM parts made to Frigidaire’s specifications, and aftermarket parts made by other companies. OEM parts cost more but fit more reliably, and aftermarket parts make sense for simple items like shelves and bins.

Most people assume a part that looks right will fit. That’s usually wrong. Frigidaire sells many refrigerator styles, and parts like water filters change from model to model, so the model number does the real work. This guide covers where to find it, which replacement parts people buy most, how to weigh OEM against aftermarket, and when the job belongs to a technician.

Where do I find my Frigidaire model number?

Close-up of a model and serial number label on an oven door frame

Start with the appliance, not the paperwork. Frigidaire’s owner support pages list tag locations by appliance type, and they describe them as the most common spots rather than fixed ones. On ranges, Frigidaire says the tag is most commonly along the interior-side trim of the oven, visible with the door open. The installation instructions for the Frigidaire FGDS3065KW range add that the serial plate sits on the oven front frame behind the oven door on some models, or on the drawer side frame on others. On a dryer, Frigidaire’s registration page points to the trim around the dryer door. Air conditioner model numbers are typically on the right side of the unit, and dehumidifiers carry theirs on the side or back near the water bucket.

Refrigerators are the tricky ones. A Hunker how-to on Frigidaire model numbers says to check the inside left or right wall and, on some units, behind the kick plate at the bottom. Your use and care guide is the next stop, but treat the number in it with suspicion. Hunker’s guide for Frigidaire ranges warns that the model number listed in an owner’s manual is often inaccurate or incomplete, so the tag on the appliance wins.

Write down the model number and the serial number together. The model number is the key for parts, while the serial number matters for warranty and recall questions, according to AppliancePartsPros. Some tags also print the manufacture date. If the tag is worn off, the sales receipt or the manufacturer’s registration lookup can fill the gap. One photo of the tag saved on your phone beats pulling out the kick plate again next year.

What are the common Frigidaire replacement parts?

Parts catalogs show what people actually replace, and refrigerator parts are the biggest category. Frigidaire parts listings include ice buckets, control panels, evaporators and door bins, along with crisper drawers and the water filter, which runs on its own schedule. Bins, shelves and crispers are the easy wins because they snap in and out with no tools and no wiring. Ice maker parts show up constantly too, and so does the door gasket, which is worth replacing the moment it stops sealing.

Control boards, temperature sensors and the evaporator are a different league. From experience, the smarter move is to confirm the fault before ordering anything electronic, because a control board bought on a hunch is the fastest way to pay for the wrong part.

For range parts and oven parts, the searches center on the igniter, the burner and the surface element. A gas range that clicks but won’t light usually points to a weak igniter, and that’s a repair of its own. Dryer parts listed by one Frigidaire parts retailer, GenuineReplacementParts.com, include the heating element, drum rollers and the door switch. Washer parts and dishwasher parts add the drain pump to the mix. A parts diagram on a retailer’s page helps here, since it shows you where each piece sits before you order.

Should I buy OEM or aftermarket Frigidaire parts?

OEM parts are built to Frigidaire’s specifications, while aftermarket parts are made by other companies to fit the same spot. The price gap is the only reason anyone looks at aftermarket parts, and for simple mechanical pieces like shelves, bins and drip bowls, Robam Living’s Frigidaire parts guide says aftermarket can work well. I agree for items where a slightly different fit costs you nothing.

For electronic components and anything in the sealed system, that same guide calls OEM the safer pick, and I’d go further. This usually goes wrong when a buyer grabs the cheapest listing without checking the cross reference against the model number, then needs a second repair. A genuine part that fits the first time costs less than two orders.

Check your warranty terms before putting a non-genuine part into an appliance that’s still covered, since coverage rules differ. For buying, the Frigidaire parts site and authorized retailers such as Sears PartsDirect and PartSelect sell genuine Frigidaire parts, and both let you search by model number to confirm the part is compatible.

How do I pick the right Frigidaire water filter?

The water filter makes the model-number rule obvious, because Frigidaire uses different filters across its refrigerator styles. AllFilters notes that Frigidaire and Kenmore use three filter configurations depending on the model. Sears PartsDirect’s filter guide lists the WFCB for top-freezer models, removed by taking off a cup filter cover inside the top right, while the ULTRAWF and WF3CB are eject-and-slide-out filters.

Frigidaire’s use and care guides for refrigerators such as the FFHN2740PS call for changing the filter at least every six months. Retailer listings for the WF3CB and WFCB add a 200-gallon limit, whichever comes first, and Sears PartsDirect says to change it sooner if the dispenser flow slows. The surest match is the part number printed on your old filter, though your owner’s manual may also list it.

What most people don’t know about Frigidaire part numbers

The number on a broken piece isn’t always the number you’ll end up ordering. Frigidaire parts catalogs show a “suggested replacement” when an original number has been replaced by a newer one. One catalog listing for a refrigerator ice bucket shows manufacturer number 242093001 with 242093003 as the suggested replacement, and another ice bucket listing points to 241829701. When a site offers a different number than the one you searched, that usually means the original was superseded, and you should confirm the new one against your model number before you order.

Brand names blur things too. Frigidaire is owned by Electrolux, according to Appliance Parts Group, which is why some parts sites group the two together. Search by model number, not by brand, and you’ll skip most of the confusion.

When should I call a technician?

Hands placing a new refrigerator water filter beside a phone photo of the model tag

A shelf, bin, filter, door gasket or ice bucket is firmly do-it-yourself territory. Work on the sealed system isn’t. The compressor, evaporator and refrigerant lines need a licensed technician, because handling refrigerant in the United States requires EPA Section 608 certification. Gas supply work on a range belongs to a professional as well, and if you smell gas, leave the house and call your gas utility from outside instead of troubleshooting parts.

Control boards sit in a gray area. I’d unplug the appliance and photograph every connector before touching anything, and I’d bring in a technician if the readings don’t make sense.

Frigidaire parts FAQ

Where is the model number on a Frigidaire refrigerator?

It’s usually on a tag on the interior side wall or behind the kick plate, and Frigidaire’s owner support pages say locations vary by model. Check the interior side walls first.

Are genuine Frigidaire parts worth the extra cost?

For electronic parts and anything in the sealed system, yes. For shelves, bins and similar mechanical pieces, aftermarket parts are a reasonable way to save.

How often should I replace a Frigidaire water filter?

Frigidaire’s use and care guides say at least every six months, or sooner if water flow slows. Some filters also carry a 200-gallon limit.

Can I order using the number on my old part?

Yes, as a starting point. A catalog may show a suggested replacement if the number was superseded, so confirm fit with your model number before you buy.

Your next step

Go find the tag. Take a photo of the full model and serial numbers, search the model on an authorized parts site, and confirm the part number before you order. If the old number comes back with a suggested replacement, follow it, then check the fit one more time.